This light package contains a OKW light head, 18650 body and tail cap. It also includes a single Modlite 3500mAh 18650 battery and a XTAR MC2 charger. While lumen output is only 680 lumen the throw is about 400% greater than the M600DF. This light head is best suited for situations where extreme throw is needed.
If you're on the fence about which light head to purchase we recommend the PLHv2 light package which is available here.
***Due to the chemical process that takes place during Type 3 Hardcoat, the finish on the product can vary from one to the next, even if it is the same batch. We strive to create as tight of a range as possible, and match parts to the best of our ability, but be aware that there may be slight variation between sections of the light.***
- Made in the USA
- Lifetime guarantee
- Approximately 680 out the front lumens and candela is approximately 69,000. It is an excellent overall light head good for indoor or outdoor use
- Drivers are fully potted and tested to withstand select fire SCAR 17 recoil
- 6061 Series Alum bezel with Mil-Spec Hard Anodizing
- Ultra clear BOROFLOAT® lens allows 98-99% light transmittance
- Length w/ Clicky tailcap: 5 3/8" / 136mm
- Head Diameter: 1 3/16" / 30.16mm
- Weight: 5.4oz (w/ tail cap and battery)
Lithium CR123 cells are not supported and if used will cause the cells to heat up and possibly explode or catch fire. We recommend the Modlite 18650 high drain cells which can be found here. Runtime is about 75 minutes with the supplied 18650 cells.
If you have question about batteries please check out our FAQ section about batteries here.