NOTE: RHF-C isn't compatible with the A2 FSP without modification. RHF-C uses a TDP spec barrel nut (not included unless specified in the drop down menu).
RHF-C is essentially a RHF4, but with MLOK at 3, 6, and 9 o'clock. RHF-C is lighter for not having 1913 rails at these locations, and offers the modularity and flexibility, and weight saving of MLOK.
RHF-C comes in two lengths, 11.5" and 9.5", it is a hand guard based on the successful Centurion Arms C4 MLOK rail system. It is a lightweight, rugged, 2 piece free float rail that provides a continuous 12 o’clock rail when installed on the upper receiver. Like the C4 MLOK system, RHF-C is a rigid rail that clamps to a standard barrel nut on all AR15, M4, and M16 type weapons systems. This design allows the installation of the rail on an upper assembly without removing the front sight post or permanently attached muzzle devices.
RHF-C incorporates Forward Controls design input: Omission of built-in QD swivel attachment points. Some like the now common front and rear located QD sockets, we prefer the location of the front sling attachment be left to individual users. The rail numbers are machine engraved, and a subdued Cygnus is engraved on the right side of the RHF4.
Features
• Material: 6061 T6
• Finish: : type 3 hard coat anodized
• Weight: RHF-C 11.5": 9.96 oz, RHF-C 9.5: 8.67 oz with screws---1.1oz more with standard barrel nut
• Length: RHF-C 11.5: Top and sides: 11 1/2in. Bottom: 10 5/8in. RHF-C 9.5: top 9.5 in Sides 9.5 in Bottom 8 in
• Height: 2.38
• Inside diameter: 1.37
• Rails: 1913 spec rail and MLOK
• Fasteners: grade 8 bolts phosphate finished
• MADE IN USA
• Rails: 1913 spec rail
NOTE: RHF-C is incompatible with BCM's Mk2 upper receivers without modification to the RHF4's anti-rotation tabs, or to the upper receiver itself.
The scoffed up area is where RHF4's anti-rotation tabs need to flank.