Forward Controls Design EPC (Twin Dimple)
Forward Controls had resisted making their version of an ejection port cover, mainly because they were preoccupied with other projects, but when they had a moment to list the things we wanted on an FCD version, it wasn't long before it became a project that they became excited about.
EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches. Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features we think many will find useful.
EPC has two "tabs" flanking the cutout for the port cover spring. These tabs allow the EPC to rest on the upper at a greater angle when it's in the down/open position, which provides more space between the port cover and lower receiver. Their job is to better allow the user's finger to get underneath the port cover when he wishes to swing it up/close.
Left: TDP ejection port cover. Right: EPC. Both in the down/open position. Please note that depending on the upper receiver, the area below the ejection port cover will vary in thickness, which affects the angle of the EPC when the port cover is open/down.
Another feature is a shallow circular depression on the side of the EPC to provide texture tactile feedback to the user's finger when he's closing the EPC. A flat surface provides nothing to the user to differentiate one surface from another, it also provides no traction. A shallow circular depression on the left side of the EPC does both. We incorporate flat surfaces with care as they have their uses . In this case, EPC's exterior surface is treated as a control surface, where a flat surface rarely makes sense.
EPC is compatible with TDP spec upper receivers.
Weight: 0.30oz.
Material: 7075
Construction and coating: billet, type III anodized.
Proudly designed and made in the USA.
NOTE:
Initial closing and opening of EPC may be stiff, this is normal, and will become easier with 2 or 3 closing/opening cycles.
[ITEMPRICE]