FORWARD CONTROLS DESIGN
RFH-H 11.75 Cam Lock M-LOK Handguard
The RFH-H (Railed Handguard, FCD, Heavy) is built to be a rigid mounting platform for IR lasers, clip-ons, and anything else that needs to hold zero. It uses an anti-rotation lockup, alignment notches, and an alignment pin.
The H stands for heavy. It is the evolution of the original RFH, made substantially more robust while keeping FCD's design features.
Cam Lock Mounting
The RFH-H uses Icon Defense's patented Cam Lock system. Installation is simple, and the result is a secure connection between the handguard and barrel nut rather than one that relies on clamping pressure alone.
Two alignment notches, one on each side, plus an alignment pin hole that interfaces with uppers drilled for it, including FCD, Hodge, and SOLGW. The FCD URF-F upper receiver is the one this was designed around.
No Proprietary Tools
The included barrel nut installs with a standard castle nut or armorer's wrench, so there is no proprietary tool to buy or lose.
The DPW wrench, a collaboration between Forward Controls Design and Revival Defense, is included. It handles the barrel nut and then goes on to install your castle nut and muzzle device.
Layout
Top Picatinny rail with staggered M-LOK slots at 3, 6, and 9 o'clock, and vent holes top, bottom, and both sides.
Running a pressure switch? The PCM cable management panels mount to those M-LOK slots and route the cable underneath. For a sling point, the MSQ-H is the M-LOK QD socket and the MFH is the fixed loop version.
Barrel Nut Options
Choose 17-4 stainless or titanium. With the 17-4 nut the handguard weighs 17.2 oz. With titanium it drops to 15.42 oz.
What's Included
1x RFH-H 11.75 Handguard
1x Barrel nut, 17-4 stainless or titanium per your selection
1x Alignment pin
1x DPW wrench
Specifications
- Length: 11.75 inches
- Icon Defense Cam Lock mounting system
- Anti-rotation tabs, two alignment notches, alignment pin hole
- Top Picatinny rail
- Staggered M-LOK slots at 3, 6, and 9 o'clock
- Vent holes top, bottom, and sides
- 17-4 stainless or titanium barrel nut
- Weight: 17.2 oz with 17-4 nut, 15.42 oz with titanium
- Installs with a standard castle nut or armorer's wrench
- For AR-15 platform rifles
- Made in USA
Shop other Forward Controls Design Products
[ITEMPRICE]