Revival Defense
Atlas-R Ti
43% lighter than the standard Atlas-R with Durable Titanium Construction
The RD Atlas-R is a Titanium 1.375x24, Bravo or “HUB” Compatible Suppressor Adapter we designed to accept our RF Muzzle Devices, Rearden and other Plan-B Compatible Muzzle Devices.
What are HUB mounts? Learn more
Will this fit my suppressor? View our suppressor compatibility chart
The Atlas-R is a lightweight and low profile silencer adapter that utilizes our Patent-Pending Castle-Lock™ Design, utilizing TDP Spec Castle Nut Notches for ease of installation and removal using common tools such as an Armorers Wrench or castle-nut wrench. Once installed, the Atlas-R can accept our RF Muzzle Devices, Rearden and other Plan B Compatible Muzzle Devices for a compact, lightweight suppressor mounting system.
The primary reason we created the Atlas-R was to create a compact, lightweight suppressor mount that also provides a way to apply precise torque values to HUB (1.375x24) suppressors with the ability to use a standard armorer’s wrench. While we see plenty of value in HUB suppressors and use them extensively ourselves, we also are aware that the end user plays a large role in the function and reliability of that system if not properly installed, so we came up with a user-friendly solution to reliably install the mount. Utilizing common armorer’s wrench notches allows you to apply accurate and consistent torque values to the suppressor with non-proprietary tools to ensure that when installed the system acts as close to an integral QD system as possible, while providing the modularity of utilizing your preference of mount and maintaining a compact form factor and light weight.
Features
Suppressor Mount
The Atlas-R, once properly installed into your silencer can accept a multitude of muzzle devices including our RF Muzzle Devices, Rearden and other Plan B Compatible Muzzle Devices. This suppressor mounting system utilizes a taper and threads to ensure a proper seal that is repeatable and reliable without adding unnecessary weight or length to the system. The taper requires about 20% more force to remove than to install.
Castle-Lock™
Patent Pending. The Castle-Lock System utilizes a combination of TDP Spec Castle Nut Notches along with (4) 1 5/16” wrench flats around the circumference give the end user the ability to apply accurate torque values during installation and the ability to utilize common tools for installation and removal. Underneath each wrench flat, we also incorporated a flat section before the chamfered edge to allow for a solid lockup when using a crescent or crowfoot wrench on the Atlas-R.
Chamfered Edges
A design suggestion from our friend Roger Wang at Forward Controls Design, the Atlas-R features chamfered edges on both the circumference of the device along with on top of the notches portion to reduce/remove and snag points. This can be extremely helpful if you store your sling in a slightly forward position or when wearing any sort of clothing/kit that has bulk to it.
What’s Included
1x Atlas-R Ti 1.375x24 Suppressor Adapter
1x Rocksett Packet
Specifications
- Muzzle Device Compatibility: RF, Rearden and Plan B Muzzle Devices
- Castle Lock™ - TDP Spec Castle Nut Notches for use with Armorers Wrenches/Castle Nut Wrenches
- Chamfered edges to remove snag points
- Material: Titanium - PVD & S-Line Coated
- Due to the nature of PVD Coating and how the application process is carried out, you may observe lines, spots or a rainbow-like finish on some surfaces. This will not affect function, sealing or alignment in any way.
- Weight: 1.52oz
- Wrench Flats: 1 5/16”
- Bravo (1.375x 24) / “HUB” Compatible
- Length Added to Suppressor: 0.5”
- 1.5” External Diameter
- Same OAL as standard Rearden Atlas
- Proudly Designed and Manufactured in the USA
Installation
- Thoroughly clean all surfaces of debris and oils
- Secure Suppressor in a vice
- Apply a small amount of Rocksett to Atlas-R Threads and install on to suppressor
- Apply appropriate torque value to Atlas-R using a Torque Wrench
- Allow Rocksett to cure for 24 hours before use
*contact your suppressor manufacturer for recommended torque value
FAQ
Q: What Suppressors can I use this with?
As long as your suppressor is threaded in the “HUB” or Bravo 1.375x24 you can install the Atlas-R. See our Compatibility Chart HERE
*Do not remove or install Atlas-R or Muzzle Devices in to Atlas-R when the suppressor is hot
SEE OUR AUTHORIZED DEALER LIST HERE
[ITEMPRICE]