APPARITION INSTRUMENTS
RB2 7.62 Muzzle Brake & 1x16LH Suppressor Mount
A shimmed muzzle brake built around Apparition's FLOW design engineering. It supports both higher flow and reduced flow suppressor systems while still delivering significant barrel rise stabilization. Threaded 5/8x24 for 7.62 and .30 cal.
Mounting System
The AI RB2 7.62 in 5/8x24 uses the 1x16LH mounting system, a thread and taper interface with left hand threads.
Mounts directly to any silencer or adapter built around 1x16LH, including the CAT QD, CGS SCI-SIX, Cobalt Kinetics Scrambler, and silencers from Blackbird RD and SOF Group.
Compatible with HUB silencers using a 1x16LH HUB adapter such as the CAT TSF X or the AI EXT HUB QD.
New to this system? Read what the 1x16LH system is. To check a specific silencer, use the Silencer Resource Center.
RB2 or NANO?
Both mount 1x16LH suppressors. They solve different problems.
The RB2 is the brake. It is shimmed and timed, 1.99 inches long, and built to manage muzzle rise across a range of suppressor flow characteristics. If recoil control is what you are after, this is it.
The NANO is the compact option at 1.44 inches, designed around small K style cans where physical size and pressure flow paths matter more than anything else.
Installation
The RB2 is a shimmed brake, so it has to be timed to the barrel. A shim kit is included.
At 1.99 inches it is not long enough to pin and weld. If you need a permanently attached device to reach 16 inches, use the NANO 14.5PW in 7.62.
What's Included
1x AI RB2 7.62 5/8x24 Muzzle Brake
Shim kit
Specifications
- Caliber: 7.62 / .30 cal
- Thread pitch: 5/8x24
- Mounting system: 1x16LH
- Overall length: 1.99 inches
- Weight: 2.5 oz
- Material: nitride 4140
- Shim kit included, brake must be timed
- Not long enough to pin and weld
Shop other Apparition Instruments Products
[ITEMPRICE]