Revival Defense & Forward Controls Design
3P15 5.56 Flash Hider & Suppressor Mount - 1/2x28
The 3P15 (1/2x28) is an effective 3-Prong flash hider that also serves as a suppressor mount compatible with our ATLAS-R, Rearden Atlas and other “Plan B” compatible mounts and suppressors. The 3P15 is also long enough that when pinned to a 14.5” barrel it will bring it over the 16” mark. The 3P15 is a part of our “RF Muzzle Devices” which are a collaboration between Revival Defense & Forward Controls Design
Will this fit my suppressor? Suppressor Mount Compatibility Chart
ABOUT THE RF SERIES MUZZLE DEVICES
The RF (Revival Defense, Forward Controls) Muzzle Devices were designed to be compact, yet practical and effective standalone muzzle devices which also serve as a reliable suppressor mount that doesn’t add unnecessary weight or length to the front of your rifle.
Features
Flash Hider
When we originally set out to design the 3P15 & 3P10 we wanted to create a high performance dedicated flash hider that also works as a secure and reliable suppressor mount that retains a compact form factor. After multiple revisions, prototypes and testing sessions we were able to get the 3P10 and 3P15 to a point where the flash mitigation performance is on par with or better than most flash hiders with a similar or larger size.
ATLAS-R, Rearden Atlas & Plan B Compatible Suppressor Mount
Our RF Series of Muzzle Devices feature a suppressor mount compatible with our ATLAS-R, Rearden Atlas and Plan B Type Mounts. This suppressor mounting system utilizes a taper and threads to ensure a proper seal that is repeatable and reliable without adding unnecessary weight or length to the system.
Nitride Finish
The Nitriding process greatly increases the surface hardness of the muzzle device while lending itself to a tighter seal in the suppressor itself.
Standardized Wrench Flats
RF Series Muzzle Devices Feature 3/4” Wrench Flats for ease of installation. The FCD JMW, Armorers Wrench or any other 3/4" Wrench can be used for installation
What’s Included
1x 3P15 1/2x28 Muzzle Device
1x Rocksett Packet
Specifications
Length: 2.15”
Weight: 2.4oz
Thread Pitch: 1/2x28
Suppressor Compatibility: Atlas-R, Rearden Atlas and Plan B Mounts
Material: Nitride and Heat Treated Precision Machined 17-4 Stainless Steel
Wrench Flats: 3/4”
Installation
Ensure firearm is unloaded
Thoroughly clean surfaces of debris and oils
Test fit muzzle device
Apply a small amount of Rocksett to muzzle device and install on to barrel
Torque to 25+/-5ft-lb
Allow Rocksett to cure for 24 hours before use
The 3P15/3P10 does not have to be timed in a specific orientation
FAQ
Q: Is the 3P15 long enough to be Pinned and Welded?
Yes, the 3P15 will bring a 14.5” barrel over the unconstitutional 16” classification of a Non-NFA Rifle when properly pinned and welded.
Q: What Suppressors can I use this with?
The options are virtually endless, as long as the suppressor features a “HUB” 1.375x24 threaded rear end, you can install our ATLAS-R, a Rearden Atlas, or any other “Plan B” Compatible adapter and use our RF devices on your suppressor. Please see our Compatibility Chart to check fitment with your suppressor when using a 3P15/3P10 and they are longer than our “Short” RF devices such as the 6315RF and 1215RF.
Q: Can I use the 3P15 on a 9mm?
NO. The 3P15 was designed around the 5.56/.223 cartridge and the bore will not fit a 9mm. Our friends over at Rearden Manufacturing offer muzzle devices in large bore variations that can safely fit a 9mm cartridge.
*Only use the wrench flats for installation of your muzzle device. Do not use a screwdriver or any other tool to apply torque through the ports. The FCD JMW is specifically designed for installation of suppressor mounts and available HERE
*Use with certain manufacturers suppressors will void your warranty
Shop other RF Series Muzzle Devices
[ITEMPRICE]